As a professional installer or a DIY enthusiast, you want to make sure that the installation of wet pour rubber flooring is successful. Not only does it ensure the safety of the users, but it also prolongs the life of the flooring. In this article, we will share with you some tips and tricks that will help you achieve a successful installation of wet pour rubber flooring.
- Proper Surface Preparation
Before installing wet pour rubber flooring, it is important to ensure that the surface is properly prepared. The surface should be clean, dry, and free of any dirt, debris, or loose materials. Any cracks or holes should be filled and levelled, and the surface should be smooth and even. Failure to properly prepare the surface can result in uneven installation, which can affect the quality and durability of the flooring.
2. Choosing the Right Thickness
The thickness of the wet pour rubber flooring should be chosen based on the intended use and the expected traffic. A thicker flooring is recommended for high traffic areas, while a thinner flooring is suitable for low traffic areas. The thickness of the flooring can also affect its shock-absorbing properties, so it is important to choose the right thickness for the intended use.
3. Proper Mixing of the Components
Wet pour rubber flooring is composed of two components: the base and the topcoat. It is important to properly mix the components according to the manufacturer’s instructions. Improper mixing can result in uneven colouring, poor adhesion, and reduced durability. Always follow the manufacturer’s instructions when mixing the components.
4. Proper Installation
The installation of wet pour rubber flooring should be done by trained professionals or experienced DIY enthusiasts. The installation process involves pouring the base layer and then the topcoat layer. It is important to ensure that the layers are evenly spread and properly levelled. The surface should be smooth and even to prevent tripping hazards and ensure the safety of the users.
5. Proper Curing
After the installation of wet pour rubber flooring, it is important to allow it to properly cure. The curing time can vary depending on the thickness of the flooring, the temperature, and the humidity. It is important to follow the manufacturer’s instructions for the curing time. Failure to properly cure the flooring can result in reduced durability and poor adhesion.
6. Regular Maintenance
Regular maintenance of wet pour rubber flooring is important to ensure its longevity and safety. The flooring should be regularly cleaned to remove any dirt or debris. Any damage or wear should be repaired as soon as possible to prevent further damage. Regular inspections should also be conducted to ensure that the flooring is still safe and effective.
In conclusion, the installation of wet pour rubber flooring is an important task that requires proper preparation, mixing, installation, curing, and maintenance. Following the tips and tricks shared in this article can help ensure a successful installation and prolong the life of the flooring.